SPV Alaskan Series Airboat

From the Florida Everglades to the great white north of Canada and Alaska, we introduce the Alaskan Series Airboat!

The SPV “Alaskan” is fully adaptable to a variety of Commercial, Emergency Response, and Sporting needs. Like the PatrolMaster Series, each boat comes with your choice performance configurations.

Hull

  • One-Piece Bottom Construction
  • Non-Trip of Latest Design
  • Lengths Available 16‘, 17′ and 18′
  • Beam 8′
  • High Sides and Transom for Safety
  • Transom relieved 15 Degrees for Rear Wash Safety
  • All Welded Aluminum Construction Bottom and Transom Marine Alloy 5086 .190
  • Bulkhead and Sides Marine Alloy 5052 .125 Aluminum
  • Bottom Stiffeners Equally Spaced Across Bottom
  • Min. 7- 2” X 2” X 1/4” T-Bar Stringers
  • Mid-Ship Cross Brace
  • Recessed Deck Area 36” Width
  • Storage Under Bow with Flush Mount Lockable Access with Drip Rail
  • 3/4 Walkaround
  • Top of Deck Non-Skid for Safety
  • Lockable 7′ Rod Box
  • Aerated Live Well with Bait Separator
  • Insulated Cooler
  • Custom Hull Stripe
  • Tackle Box

Polymer

  • 3/8” Polymer Bottom
  • Attached with Stainless Steel Fasteners

Engine

  • New 509 C.I.D. / 520 H.P. GTO/MAS Performance Engine
  • New QuickFuel 800 CFM Carburetor / 87 octane Compatible
  • 12 Volt 65 Amp Alternator with Dual Belt/ Pulley System
  • Electric Fuel Pump with Fuel Filter/Water Separator
  • U.S.C.G. Approved Fuel Lines
  • Certified Marine Spark Arrestor/with Rain Cover
  • HEI Distributor
  • Heavy-Duty Flywheel

Reduction

  • Stinger Gear Reduction
  • 2.38 to 1 Ratio
  • Soft Drive

Propeller

  • Adjustable Pitch Composite Propeller Matched to Horse Power of Engine

Seating

  • Seating for Five, Two Single Rear Operator, Triple Seat Up Front
  • Your Choice of Color Custom Marine Vinyl Seat Cushions and Rain Covers

Rigging

  • Stainless Steel Super Structure with 11/4” Engine Stand Supports
  • Stainless Steel Seat Package and Cage
  • Three Main Hoop Cage with Heavy Duty Expanded Metal Brush Protection

Equipment

  • Cable Steering Attached to Top of Rudders
  • Stainless Steel Flex Pipe 3”
  • Stainless Steel Headers
  • Stainless Steel Mufflers
  • Heavy-Duty Engine Cooling Aluminum Radiator
  • Aluminum Coolant Expansion Tank
  • U.S.C.G. Approved Radiator Hoses
  • Complete Bilge System
  • Dual Batteries with Battery Boxes
  • Ignition Protected Battery Selector Switch
  • Certified 50-Gallon Aluminum Fuel Tank with Remote Fill
  • 4-Foot Air Foiled Aluminum Rudders, Foam Filled, Nylon Bushings
  • Stainless Steel Rudder Rods
  • Rudders Attached with Rod Ends
  • Assembled with Stainless Steel Fasteners
  • KC Lights Attached to Cage
  • Rod Holders on Cage
  • Stainless Steel Flush Mount Cleats
  • Floor Board Courtesy Light

Instrumentation

  • Marine Standard Wiring
  • Lighted Marine Gauges
  • Labeled Marine Toggle Switches
  • Voltmeter
  • Temperature Gauge
  • Oil Pressure Gauge
  • Tachometer
  • Hour Meter
  • Fuel Gauge
  • Marine Keyed Ignition Switch
  • 1- 12 Volt Marine Power Point
  • Fuse Panel with Circuit Breakers
  • U.S.C.G. Approved Navigational Lights
  • Engine Warning System

Trailer

  • Aluminum
  • Tandem Axle (3500 lbs. Per axle)
  • 2” Heavy-Duty Coupler
  • Heavy-Duty Tongue Jack with Wheel
  • Heavy-Duty Wench
  • Easy Grease Bearings
  • Carpet Side Boards / EZ Load Rollers on Rear
  • D.O.T. Lights

Click to see additional Options and Accessories

4600 W. Hwy 326, Ocala, Florida 34482 - Telephone: 352-401-9070
Hours: Monday-Friday 8:00am - 6:00pm Saturday: 10:00am - 4:00pm