The SPV "Diesel" Series

Get your SPV “Diesel” Series Airboat turn key and ready to go with all of the equipment you need to get the Job Done.

HULL

• One Piece Bottom Construction
• Non-Trip of Latest Design
• Available Lengths 20’, 24’, 36’
• Available Beams 8 1/2’, 10’
• Height of Midship 30 Inches
• Transom Min. 20 Inches
• Transom relieved 15 Degrees for Rear Wash Safety
• All Welded Aluminum Construction Bottom and Transom Marine Alloy 5086 .250
• Bulkhead and Sides Marine Alloy 5052 .125 Aluminum
• Bottom Stiffeners Equally Spaced Across Bottom
• Min. 11 - 2” X 2” X 3/8” T-Bar Stringers
• 2-Cross Braces
• Recessed Deck Area 36” Width
• Storage Under Bow with flush mount Lockable Access with drip rail
• Top of Deck will be Non-Skidded (Your Choice of Color)
• Custom hull strip

POLYMER

• 3/8” Polymer Bottom
• 1/4” Polymer on Sides
• Attached with Stainless Steel Fasteners

ENGINE

• New GM Duramax Turbo Diesel Engine
• Custom Digital Engine management Controller
• Several Horse Power/Torque Tunes Available
• Heavy Duty 12 Volt 140 Amp Alternator with Serpentine Pulley System
• Electric Fuel Pump with Fuel Filter/Water Separator
• U.S.C.G. Approved Fuel Lines
• Electric Gear Reduction Starter
• Heavy Duty Flywheel

REDUCTION

• Heavy Duty Stinger Gear Reduction
• 1.84 to 1 Ratio

PROPELLER

• Adjustable pitch Composite Propeller Matched to Horse Power of Engine

SEATING

• Seating Options, Two Single Rear Operator, with Optional Passenger Bench Seating
  Your Choice of Color Custom Marine Vinyl Seat Cushions and Rain Covers

RIGGING

• Super Structure with 1 ¼” Engine Stand Supports
• Seat Package and Cage
• Steel, Stainless or Anodized Aluminum Construction

EQUIPMENT

• Cable Steering Attached to Top of Rudders
• Stainless Steel Flex Pipe 3”
• Stainless Steel Headers
• Stainless Steel Mufflers
• Heavy Duty Engine Cooling Aluminum Radiator
• Intercooler
• Aluminum Coolant Expansion Tank
• U.S.C.G. Approved Radiator Hoses
• Complete Bilge System
• Dual Batteries with Battery Boxes
• Ignition Protected Battery Selector Switch
• Certified 70 Gallon Aluminum Fuel Tank with Remote Fill
• 4 Foot Air Foiled Aluminum Rudders, Foam Filled, Nylon Bushings
• Stainless Steel Rudder Rods
• Rudders Attached with Rod Ends
• Assembled with Stainless Steel Fasteners
• KC Lights Attached to Cage
• Floor Board Courtesy Light

INSTRUMENTATION

• Marine Standard Wiring
• Lighted Marine Gauges
• Labeled Marine Toggle Switches
• Voltmeter
• Temperature Gauge
• Oil Pressure Gauge
• Tachometer
• Hour Meter
• Fuel Gauge
• Marine Keyed Ignition Switch
• 1- 12 Volt Marine Power Point
• Fuse Panel with Circuit Breakers
• U.S.C.G. Approved Navigational Lights

TRAILER

• Galvanized or Aluminum
• Tandem or Triple Axle (3500 lbs.)
• 2” Heavy Duty Coupler
• Heavy Duty Tongue Jack with Wheel
• Heavy Duty Winch
• Easy Grease Bearings
• Carpet Side Boards
• L.E.D/D.O.T. Lights

Click to see additional options here

For pricing and configuration details call our sales department at (352) 401-9070!